Designated Substance and Hazardous Materials Survey in New Brunswick

Cost band, turnaround and the statutory backdrop under Clean Environment Act (R.S.N.B. 1973, c. C-6, with the Petroleum Product Storage Regulation).

By Envirolor Data DeskUpdated Reviewed Editorial policyReport an error

01The numbers

Cost band

$2,400–$11,100

Flagged 50,000 sf reference asset

Midpoint

$4,400

Modelled, not quoted

Turnaround

16 days

Engagement to draft

Sequence

Stage one

Runs in parallel

A Designated Substance and Hazardous Materials Survey in New Brunswick covers the following. Bulk sampling and laboratory analysis for asbestos-containing materials, lead, mercury, silica and other designated substances, producing the inventory that must be handed to any contractor before demolition or renovation.

On any building constructed before the mid-1990s, and legally before any renovation or demolition work is tendered. In New Brunswick the statutory backdrop is the Clean Environment Act (R.S.N.B. 1973, c. C-6, with the Petroleum Product Storage Regulation), administered by New Brunswick Department of Environment and Local Government.

Envirolor models this report at $2,400–$11,100 in New Brunswick on a flagged 50,000 sf industrial asset, with a 16-day turnaround. The regional cost index of 0.85 and a 4-day scheduling penalty on intrusive work are both applied. Cost scales with floor area at an elasticity of 0.45, so a building twice the size is not twice the fee.

Where deals break on this report: Skipped at acquisition, then discovered at first tenant fit-out — when abatement is on the critical path of a signed lease commencement date.

This is a stage-one report, so it runs in parallel with the other opening scopes rather than extending the calendar. Engaging it on day zero alongside the Phase I is free schedule.

Envirolor facts

  • Designated Substance and Hazardous Materials Survey is a tier-2 report in the Envirolor catalogue.
  • New Brunswick applies a cost index of 0.85 and a 4-day scheduling penalty to intrusive work.
  • Filing route in New Brunswick: Site remediation report accepted by the department.

How these figures were produced

  • Modelled — Derived arithmetically from observed inputs using the published method; not a market quote.
  • Baseline seed — A documented starting estimate awaiting first observation. Treat as an order-of-magnitude figure only.
How Envirolor computes these numbers

02Scope of work

What the consultant actually does

Bulk sampling and laboratory analysis for asbestos-containing materials, lead, mercury, silica and other designated substances, producing the inventory that must be handed to any contractor before demolition or renovation.

Where it goes wrong: Skipped at acquisition, then discovered at first tenant fit-out — when abatement is on the critical path of a signed lease commencement date.

03Scope your own deal

Price this into a New Brunswick scope

Enter the asset and the site history. The estimator decides which reports a lender and the New Brunswick regulator will actually require, prices each one, and sequences them into a calendar you can hold against your condition period.

Site history flags

Modelled cost

$9,400–$37,100

Midpoint $16,900

Critical path

25 days

Engagement to reviewed drafts

Risk screen

Low

No flag driving sampling

Condition period

20 days spare

Scope fits

ReportStatusCost bandDaysLands
Roof / envelopeA 41-year-old roof is usually the largest single line in the reserve table; a dedicated review turns a range into a number.Recommended$2,100–$9,40014Day 14
DSS / hazmatA 1985 building is pre-ban construction: the survey is legally required before any renovation or demolition is tendered, and the abatement number belongs in the purchase price.Required$2,400–$11,10016Day 16
Phase I ESAEvery lender on a commercial file requires a Phase I addressed to it with reliance, dated within six months of funding.Required$1,900–$4,70017Day 17
BCA / PCAThe lender's reserve requirement is set off the BCA's capital table, so it is a funding condition, not a nice-to-have.Required$3,000–$11,90020Day 20

Out of scope, and why

  • Phase II ESA — No area of potential environmental concern was flagged, so the Phase I should close without sampling. If it does not, add roughly the Phase II band to both cost and calendar.
  • Geotech — An existing building with a known grading history rarely needs a geotech at acquisition; add one before any addition.
  • Elevator — No elevating devices in the asset.

Take this with you

Diligence scope memo

A scope of work you can send to a consultant, attach to a lender package, or hold against a condition-period calendar. Print to PDF — nothing leaves your browser.

Prepared
2026-10-09 by Envirolor
Jurisdiction
New Brunswick — R.S.N.B. 1973, c. C-6, with the Petroleum Product Storage Regulation
Asset
50,000 sf industrial, built 1985
Site area
87,120 sf
Risk screen
Low (score 1)
Condition period
45 calendar days
Modelled cost
$9,400–$37,100
Critical path
25 calendar days

Scope of work

  1. 1. Roof and Building Envelope Review — Recommended

    Roof-level inspection with core cuts where warranted, moisture scanning, flashing and parapet review, and an envelope assessment covering cladding, sealants and glazing, with remaining service life and replacement cost.

    $2,100–$9,400 · engage day 0 · draft day 14

  2. 2. Designated Substance and Hazardous Materials Survey — Required

    Bulk sampling and laboratory analysis for asbestos-containing materials, lead, mercury, silica and other designated substances, producing the inventory that must be handed to any contractor before demolition or renovation.

    $2,400–$11,100 · engage day 0 · draft day 16

  3. 3. Phase I Environmental Site Assessment — Required

    Records review (fire insurance plans, aerial photography, title, environmental registries), a site reconnaissance visit, and interviews with the owner, occupants and the municipality. The deliverable identifies areas of potential environmental concern (APECs) and states whether intrusive investigation is warranted.

    $1,900–$4,700 · engage day 0 · draft day 17

  4. 4. Building Condition Assessment — Required

    A walk-through of structure, envelope, roofing, mechanical, electrical, vertical transportation, life safety and site works, followed by an immediate-repair list and a capital reserve table projecting replacement costs over the study period.

    $3,000–$11,900 · engage day 0 · draft day 20

Verdict

This scope runs 3 required and 1 discretionary report, for a modelled $9,400–$37,100 and a 25-day critical path from engagement to a reviewed set of drafts.

Against the 45-day condition period entered, that leaves 20 days of slack — enough to absorb one lab delay, not two.

No area of potential environmental concern was flagged, so the base case is a Phase I that closes clean. If it does not, the Phase II adds roughly 30 days and the sampling band to this answer.

Modelled figures produced by the Envirolor scoping method from published cost bands and the Clean Environment Act (R.S.N.B. 1973, c. C-6, with the Petroleum Product Storage Regulation). Not a quotation and not professional advice. Confirm scope and fees with a qualified consultant before relying on this memo.

04Questions

How much does a DSS / hazmat cost in New Brunswick?

$2,400–$11,100 on a flagged 50,000 sf industrial asset, modelled by Envirolor from published cost bands with a 0.85 regional index applied. Smaller assets sit below the band; the fee does not scale one-for-one with area.

How long does it take in New Brunswick?

16 calendar days from engagement to draft, including the 4-day New Brunswick scheduling penalty applied at half weight to non-intrusive work.

What forces this report in New Brunswick?

On any building constructed before the mid-1990s, and legally before any renovation or demolition work is tendered.

05Sources

Sources

  1. [1] Clean Environment Act — R.S.N.B. 1973, c. C-6, with the Petroleum Product Storage Regulation — Administered by New Brunswick Department of Environment and Local Government.
  2. [2] CSA Z768-01, Phase I Environmental Site Assessment — Canadian report standard.
How Envirolor computes these numbers

Envirolor Data Desk method · Last updated 2026-08-15 · Maintained by Envirolor Data Desk

Scope: Designated Substance and Hazardous Materials Survey in New Brunswick

Inputs: Envirolor modelled cost bands; Clean Environment Act

Next scheduled review: 2026-11-15

Not advice — Envirolor is a data publisher. We do not perform, certify, or supervise professional work, and nothing here is a quote, an engagement, or professional advice. Figures are indicative benchmarks for comparison and must be confirmed with a qualified professional before you rely on them. About Envirolor